CANON SCANGEAR TOOL PDF
CANON SCANGEAR TOOL SOFTWARE

Furthermore included in the delivery are a warranty-card, installation guidelines and both power- and usb cable. They are then fixated at both upper and lower edge of the scan area by means of Positionierungshilfen. The film holders are identical with those of the CanoScan 9000F and are placed directly onto the glass plate.

The latter may be in the shape of 6 x 4,5 cm, containing up to four frames, up to three frames in the format of 6 x 6 cm, or up to two, possibly three frames (depending on the width of the spacing in between the frames). The box contents of the CanoScan 9000F Mark II are as follows: First of all, the required film mounts for usage in conjunction with the transparency unit - one film holder for one up to four mounted slides, one for 35mm film strips containing one up to six frames and one for medium format film strips with a maximum length of 22 cm. The precise scan-parameters of the keys may nevertheless be adjusted in the custom settings of the scan software. Thereafter located is the key for copying and another for email-dispatch.

CANON SCANGEAR TOOL PDF

The next four keys serve the purpose of generating PDF documents - and the setup of the latter (color, grayscale, user-defined and cancel). They are divided by topic the leadoff large key will start the auto-scan, whereby the current film material will be automatically recognized and scanned. On the upper part of the lid, right next to the power button, seven additional keys are available. Underneath resides the transparency unit. It is not possible, albeit, to completely detach the lid, since the transparency unit housed within it is gated by cables pass through the very hinges connecting the body and the lid.Ī white cover for scanning reflective originals is located on the inner part of the lid, which, for digitizing transparencies, has to be removed. For scanning bulky templates such as books, the lid may well be pulled out upwards by about 2.5 cm. At 45 degrees, the lid locks in place, obviating the need for opening it all the way. The lid of the scanner can be swung open at an angle of 90 degrees. For further information on this subject, please refer to the chapter Image quality. The achievable resolution of flatbed scanners is de facto much smaller than the values stated by the manufacturers. However, this is to be understood as a mere theoretical figure, since such extreme values make sense only with scanning high-resolution film material in the 35mm sector or below. Digitizing takes place with a maximum color depth of 48 bits and an optical resolution of 9600 x 9600 dpi. The FARE-Level-3 technology of the predecessor for automatic dust- and scratch removal is employed as well. For transparencies, the maximum area amounts to 6 x 22 cm. Technically speaking, the CanoScan 9000F Mark II is a CanoScan 9000F: It features a DIN A4/Letter scan area covering a total range of 21,6 x 29,7 cm for reflective originals. There is no successor for it.įeatures, accessories and performance evaluation

The Canon CanoScan 9000f Mark II has been taken from the market in April 2019. The following test report shall illustrate how the CanoScan Mark II proves in practice - and point out the distinctions from the preceding model. As already experienced with other scanners, a different scan application can make quite an impact both on picture quality and scanning speeds.

CANON SCANGEAR TOOL SOFTWARE

For the purpose of saving energy, the CanoScan 9000f Mark II comes equipped with energy saving features such as an auto power off function which kicks in after a specific idle time.įor its class, the CanoScan 9000F yielded a good price-performance-ratio in our detailed test report, not least due to the scan software SilverFast, which at the time, used to be included in the delivery. Merely the software kit and the power consumption have been altered: whereas the precursor still featured the outstanding scan software SilverFast SE, Canon now relies on an application of their own.

According to Canon, the new CanoScan 9000F Mark II is technically identical to the previous model. The seven control keys in the front section of the scanner are completely identical, as well. Visually, the Mark II can be distinguished from its forerunner only based on the lettering and the logo on the lid of the scanner. The technical specifications of the CanoScan 9000F Mark II have not changed in comparison to its predecessor. Original Canon-accessories are still available in our Filmscanner-Shop.

Canon scangear tool